ZZ-D10 single-vent dispensing valve is different from ordinary dispensing valve. Other types of dispensing valve are slightly different. Other types are basically double-vent. This single-vent dispensing controller is a single-hole machine with suction function, and can still realize dispensing task. It is one of the common types of single-liquid dispensing valve.
 

Spot Valve Parameters

Operating Viscosity: 1~10,000 CPS

 

Vomiting volume: 0.1g

 

Operating pressure: 4-7kg/cm3

 

Feed pressure: <10kg

 

Operating frequency: <600min

Feed spout size: 1/8"npt(f)

 

Rubber outlet bore: 2mm

 

Flow regulation: none

 

Spot Valve: Back-suction Spot Valve (with backsuction function)

 

Shape size: (D) 20x (H) 120 (mm)

 

Weight: 81g

 

Controller: 982 point glue controller

 

Installation Screw: Handheld

 

Features and advantages

 

1. The dispensing valve of the pressure barrel can still be used without the need to configure a double-vent controller.

 

2. The original single-liquid dispensing controller can be used to dispense glue by adding a dispensing valve and a pressure bucket.

 

3. Single air inlet, more sensitive control of glue outlet and clean gel breakage.

 

4. Top needle type dispensing device can control low viscosity glue with good sealing.

 

5. Simple operation and easy control to avoid glue-dispensing problems.

 

Suitable glue type

 

1. uv, sealant, silicone, black, lubricant, butter, etc.