ZZ-23 pin dispensing valve is a very sophisticated valve body. It is a pin dispensing valve suitable for manufacturers. It is cheap with a price of 130 yuan per unit and 100 yuan per batch (10 pieces). Welcome to contact manufacturers.
Material: The whole body is made of stainless steel, after anodic oxidation, mainly black.
23 plunger dispensing valve
Parameters:
Operating Viscosity: 1-8000CPS
Vomiting volume: 0.01ml
Operating pressure: 4-7kg/cm3
Feed pressure: <10kg
Operating frequency: <600min
Feed spout size: 1/8"npt(f)
Rubber outlet bore: 2mm
Flow regulation:
Shape size: (D) 19 x (H) 168 (mm)
Weight: 123g
Control solenoid: 2-way 5-way/2-way 3-way available
Installation screw: M8 screw
Advantages and features
1. Low-viscosity glue can be used, and the top pin point valve has a good seal.
2. Accurate control of gum output and even gum output.
3. The glue flow can be adjusted by air pressure and adjusting device to control the glue output.
4. Small size, light weight, easy maintenance and corrosion resistance.
Top pin dispensing valve
Fit glue:
Good fluidity, low viscosity type of glue, e.g. ink, white latex, alcohol, uv, paint, oil.
Product Display: